Soft shoulder straps and an ergonomic design keep the entire knee comfortable throughout the day. The knee pads fit men and women knees with like a charm.
Item No.: MSK09
Material: Neoprene, EVA
Color: Black
Product Size: S, M, L or customized
Certificates: FDA, CE , ISO13485
The MSK09 soft knee pads are the lightest sleeve in the Medisolemates knee brace range. It is a stretch panel that slides over the knee, sits centred on the patella, and stays in place with an anatomical taper rather than with straps. The construction is deliberately plain: a soft stretch body, a contoured buttress around the kneecap, and a thickened section on each side of the joint.
For a buyer, the useful way to describe this product is a low-bulk patella support sleeve. It is not a hinged brace, it does not restrict the range of motion, and it carries no rigid stays. Buyers who need motion control belong on a different SKU — see the hinged neoprene compression sleeve MSK07 for dual-axis hinges, or the open patella support brace MSK13 for spring stays.
The body is a soft stretch textile with a contoured panel over the kneecap and reinforced knit sections either side of the joint. Two construction details matter when you are specifying this for a retail programme.
First, the buttress is contoured rather than flat. A flat pad sits against the kneecap and reads as a marker; a contoured one wraps slightly around it, which is the reason the sleeve holds position without straps.
Second, the panel is cut anatomically. The taper above and below the joint is what stops the sleeve migrating up the thigh during flexion, and it is the detail most often lost when a buyer copies a generic supplier’s pattern.
Material composition for this SKU is listed in our product data as Neoprene, EVA. The photograph set shows a knitted stretch body with a moulded patella element, so the exact fibre breakdown, the thickness of the patella element and the presence of any foam layer need to be confirmed against the current factory specification before you print a fibre label or a customs description. the specification block and the product photographs describe different constructions, and this figure feeds a fibre label, a customs declaration and an EU market-compliance view. Do not print a composition until the factory confirms which layer this refers to.
The MSK09 is aimed at buyers who need a light, low-profile sleeve for volume retail rather than a clinical indication. Typical demand comes from sports and activewear programmes, physiotherapy clinics buying in small quantities, and promotional or corporate wellness bundles.
It suits users who want warmth and mild, even compression around the joint during ordinary activity, and who do not need mechanical restraint. If a buyer needs to restrict rotation, protect a healing ligament or protect a kneecap that is tracking laterally, this is the wrong product and we will say so rather than sell it into that use case.
One point has to be stated plainly. This is a support garment, not a medical device and not a treatment. It applies even pressure and it warms the joint; it does not diagnose, treat or prevent any condition. Any claim of that kind needs clinical evidence and a different regulatory route.
Put the sleeve on by rolling it down the leg from the thigh rather than stretching it over the foot, then adjust it so the contoured panel is centred on the kneecap.
Machine wash cold on a gentle cycle, or hand wash, with mild detergent. Do not bleach. Line dry away from direct heat and do not tumble dry, since heat damages both the elastane content and the moulded patella element. Do not iron the panel.
A sleeve that is washed hot and dried hot will lose its compression and its shape long before the fabric wears through. For a retail programme we recommend printing the care symbols on the hang tag rather than relying on the packaging insert.
Medisolemates has manufactured orthopaedic and medical support products in Shenzhen since 2010. The factory, the cutting room and the packaging line are on one site, which is what makes a low-MOQ colour run and a quick sample turnaround realistic for a generic sleeve like this.
Customization available on this model , the following list reflects standard requests we handle; confirm each against the current quotation for this SKU before offering it to a customer:
MOQ, lead time and price depend on the size run, colour count and packaging, and are quoted per programme. Send us the specification you need and we will come back with a quotation. Enquiries submitted through this page are answered within 12 hours.
Three reasons, stated plainly.
The catalogue is coherent around it. The MSK11 single-strap patella belt and the MSK12 dual-strap patella knee strap are tendon-focused, the MSK13 is the open patella sleeve with spring stays, and the MSK09 is the plain stretch sleeve. A distributor can carry the whole patella and sleeve range from one supplier on one certificate set, one slider tool and one packaging language.
The supply chain is short. Cutting, assembly and packing are on one site in Shenzhen, which is what makes small colour runs and sample-led development practical.
The documentation sits on the buyer’s side of the table. Material test reports, the certificate set, the size chart and the carton marking template all travel with the order.
Both words are used in the trade and they mean different products. A knee pad is normally a foam or gel kneeling pad worn by installers kneeling on a hard surface. A knee brace is a garment worn around the joint for support. The MSK09 is the second of these — a stretch support sleeve. If you are looking for kneeling pads for flooring or roofing work, this is the wrong product page and we will point you to the right one.
The MSK13 has an open patella cutout ringed by a pad, two spring stays and hook and loop straps, and it comes in one universal size. The MSK09 has no cutout, no stays and no straps, and it comes in a three-size run. The MSK13 gives more lateral control; the MSK09 is lighter and cheaper.
No. It provides warmth and mild, even compression around the joint. There is no hinge, no rigid stay and no motion limit. If you need controlled range of motion, look at a post-operative ROM brace instead.
Yes. Because the sleeve has no strap of its own, it can be worn underneath a strap product such as the MSK11 or MSK12 without the two fighting each other over the same anchor point.
S, M and L as standard, with custom sizing available on request. The leg circumference for each size needs to be confirmed before you publish a size chart. Ask for the current chart with your enquiry.
Yes. Custom colour, branded hang tags and backing cards, private-label sewing labels, custom retail packaging and carton marking are all available. MOQ depends on the size run and colour count and is quoted per programme.
No. It is a support garment and it is marketed as one. It applies mechanical pressure and warmth; it does not treat or prevent any condition. If your market requires a medical device route for the product you intend to sell, tell us before development starts.
Tell us the size run, colour, packaging and destination market you are working with, and we will come back with pricing, MOQ and lead time. Quotations are prepared by a person, and every enquiry submitted here is answered within 12 hours.
Contact: +86 199 2645 9283 · sale@medisolemates.com
Submit Your Inquiry to Medisolemates,
All the Inquiries Will Be Replied Within 12 Hours.
We will contact you within three hours, please pay attention to the email with the suffix “@medisolemates.com” or “@knoltechs.com”
