The Adjustable Knee Compression Brace With Stabilizer Straps is designed to help relieve pain from knee injuries, knee sprains, jumpers knee, arthritis & patella tendonitis.
Item No.: MSK10
Material: Nylon, polyester & Spandex
Color: Black+Green, Black+Orange
Product Size: S M L XL
Certificates: FDA, CE , ISO13485
The MSK10 compression knee brace is a knitted sleeve with four wrap-around straps. It slides over the leg and the straps close across the front of the joint, so the compression the wearer gets is set by how tightly those four straps are pulled rather than by a single fixed figure.
That is the defining feature and it is worth being precise about, because it is what separates this product from every other sleeve in the catalogue. A plain compression sleeve produces a fixed, predetermined pressure that depends on the fabric. The MSK10 produces adjustable pressure: loose for a long walk, firm for a working shift or a heavier activity, and re-adjustable during the day without taking the sleeve off.
The sleeve body is knitted rather than woven, and the side panels are knitted in a different structure again. That construction detail is why the brace stays where it is put. The other differentiator is the patella opening: the front of the sleeve is cut away over the kneecap and ringed by a contoured pad, so the kneecap is not covered by a compressive panel and the brace does not press a hard edge directly onto the joint line.
【 the composition above is read from the current product data, which lists Nylon, polyester & Spandex. Confirm the fibre percentages and the elastane content against the factory specification before printing a fibre label, a customs description or a market-compliance document. Note also that the product data does not state whether the patella pad is a separate component or moulded into the knit; the photograph suggests a separate moulded element.】
One note on wording. When this product is described as Brace on a purchase order, that is fine as an internal convention, but note that Velcro is a brand name. Write hook and loop in anything that feeds a label, a specification sheet or a customs document.
Four sizes are offered: S, M, L and XL. Unlike the single-size products in this range, the MSK10 is built on a graded size run.
The circumference figures are not published on the current product data. Ask for the size chart with your enquiry — a graded size run only pays off if the chart is accurate.
Fit is closest on a bare leg or under close-fitting sportswear. Because the straps close across the front, the sleeve can be pulled down slightly during fitting and the straps then hold it in position.
The MSK10 is built for buyers who need compression the wearer can adjust, in a programme that needs more than one colour and a genuine size run. Typical demand comes from sports and football accessories, running and gym retail, physiotherapy and rehab clinics, and promotional programmes.
It works well for long periods of activity: a working shift on your feet, a training session, or a day of manual handling. The straps are the point here, because a fixed-compression sleeve tends to become uncomfortable over a long stretch, while an adjustable compression knee brace can be loosened during rest and tightened again afterwards.
It is also the right shape for a user who cannot wear a rigid brace, because the sleeve has no hinge and no rigid stay and works entirely through fabric pressure. Buyers who need to restrict the range of motion should be looking at a hinged or post-operative ROM brace instead.
To be clear about what this product is: it is a support garment and it is sold as one. It applies mechanical compression and retains warmth around the joint. It is not a medical device, it does not treat any condition, and no claim in this copy should be read as a therapeutic claim.
Slide the sleeve up the leg until the patella opening sits over the kneecap. Pull it down slightly so it sits snug, then close each strap in turn, working from the upper strap to the lower one so the sleeve settles evenly. Adjusting is a matter of re-closing the straps, which is why they are the closure point rather than a fixed seam.
Machine wash cold on a gentle cycle, or hand wash, with mild detergent. Do not bleach. Line dry away from direct heat. Do not tumble dry and do not iron, since heat damages both the elastane content and the moulded patella pad. Close the straps before washing so the hook and loop does not catch on the knitted body.
For a retail programme we recommend the care symbols go on the hang tag. Hook and loop caught in a knitted sleeve is the fastest way to shorten the life of this product in a customer’s hands.
Medisolemates has manufactured orthopaedic and medical support products in Shenzhen since 2010. Cutting, assembly and packing are on one site, which is what makes small colour runs and sample-led development practical for a graded-size sleeve.
Customization available on this model 【 the list below reflects standard requests we handle for this category; confirm each against the current quotation for MSK10 before offering it to a customer】:
MOQ, lead time and price depend on the size run, colour count and packaging, and are quoted per programme. Send us the specification you need and we will come back with a quotation. Every enquiry submitted through this page is answered within 12 hours.
Medisolemates holds ISO 13485 certification for its quality management system, and holds CE conformity and FDA registration references covering the product range. The full certificate set, material test reports and carton marking templates are supplied with the quotation rather than published on this page, because certificate scope has to match the specific model and the specific market.
【待确认 — the certificates block on this product page lists FDA, CE, ISO13485 as “Certificates”. ISO 13485 is a quality-system certification held by the legal entity; CE is a conformity marking; FDA is normally a registration or listing rather than a certificate. Confirm the exact wording you want per market before publishing it.】
Three reasons, stated plainly.
This is not a single product in a catalogue of near-identical sleeves. The adjustable compression sleeve MSK10 sits alongside the plain stretch sleeve MSK09, the hinged neoprene sleeve MSK07, the open patella brace MSK13, and the single- and dual-strap patella products MSK11 and MSK12. A distributor can build a patella and compression range from one supplier on one certificate set, with one slider tool, one packaging line and one colour story.
The supply chain is short. Cutting, assembly and packing are on one site in Shenzhen, which is what makes a two-colour size run with custom packaging a realistic order rather than a special project.
The documentation sits on the buyer’s side of the table. Material test reports, the certificate set, the graded size chart and the carton marking template all travel with the order.
A plain sleeve produces one fixed level of compression, set by the fabric. The MSK10 has four wrap-around straps, so the wearer adjusts the compression by changing how far each strap is closed, and can change it during the day without removing the sleeve. It also has a patella opening, so the kneecap is not covered by a compressive panel.
No. The MSK09 is a plain stretch sleeve with no straps and no compression adjustment. The MSK10 is the adjustable-strap version with four wrap straps and a patella opening. If you are building a range, the two cover different price points and different use cases.
No. The MSK07 is neoprene with dual-axis motion control hinges and a neoprene size run, and it works by mechanical restriction of the joint. The MSK10 is knitted, has no hinge and no rigid stay, and works entirely through fabric compression. Buyers who need motion control want the MSK07.
It is designed to provide support, warmth and adjustable compression around the joint. It is a support garment, not a medical device, and it does not treat an injury or a condition. If you are sourcing this for a diagnosed condition, speak to the treating professional first, and tell us before development starts if your market requires a medical device route.
Four sizes — S, M, L and XL — in two colourways, black with green and black with orange. The leg circumference for each size needs to be confirmed before you publish a size chart; ask for the current chart with your enquiry.
It is worn on either leg, but it is not left and right handed. confirm from the factory whether the patella pad geometry is symmetrical, or whether one shape is produced for the left and right knee. If it is moulded asymmetrically this needs to be stated in the specification.
Yes. Custom colour, branded hang tags and backing cards, private-label sewing labels, custom strap colour and length, custom retail packaging and carton marking are all available. MOQ depends on the size run and colour count and is quoted per programme.
Tell us the size run, colour, packaging and destination market you are working with, and we will come back with pricing, MOQ and lead time. Every enquiry submitted here is answered within 12 hours.
Contact: +86 199 2645 9283 · sale@medisolemates.com
Submit Your Inquiry to Medisolemates,
All the Inquiries Will Be Replied Within 12 Hours.
We will contact you within three hours, please pay attention to the email with the suffix “@medisolemates.com” or “@knoltechs.com”
