Protects the foot and leg with built-in Automatic air pockets on both sides, increasing stability and compressibility, providing comfortable and balanced orthopaedic support, reducing walking stress and promoting the healing of injured bones.
Item No: MSE05
Material: Plastic, Foam, Velvet
Color: Gray
Product Size: S, M, L
Certificates: FDA, CE , ISO13485
Three reasons, stated plainly.
The catalogue covers the whole decision tree. The MSE05 is the inflatable walker with dual built-in pumps — no separate hand pump, no mouthpiece. The MSE04 is the CAM air walker with medial/lateral bladders inflated by mouth. The MSE08 is the air ROM walker with dial-stepped ROM. A distributor can carry the full post-operative ankle walker range from one supplier, on one certificate set, one slider tool and one packaging language.
The supply chain is short. Cutting, assembly and packing are on one site in Shenzhen, which is what makes small colour runs and sample-led development practical.
The documentation sits on the buyer’s side of the table. Material test reports, the certificate set, the size chart and the carton marking template all travel with the order.
The MSE05 inflatable walker boot is a low-profile short-leg walker built for buyers who need a one-piece inflation mechanism — no separate hand pump to lose or sterilise between patients. Two hand pumps are integrated into the shell itself, one on the medial side and one on the lateral side. Each pump is operated by squeezing a soft bulb, which inflates an air pocket inside the boot and adds compression to the side the patient is loading. It is the model to specify when the prescription is simple, fast, single-operator inflation rather than fine-grained adjustable compression.
For a buyer sourcing from a Chinese orthopaedic manufacturer, the practical way to describe this SKU is: a low-profile inflatable walker boot with dual integrated pumps and automatic air pockets on both sides, a breathable contoured liner, and a low-profile rocker sole. If your buyer needs a finer pressure gradient that can be adjusted by the patient (rather than a yes/no inflate per side), that is a different SKU — see the orthopedic CAM air walker MSE04 for medial/lateral air bladders inflated by mouth through a valve.
Eight construction details matter when you specify this for a retail or hospital programme.
Dual integrated hand pumps. Two soft bulbs sit in pockets on the medial and lateral side of the shell. Squeezing a bulb inflates the air pocket on that side; releasing the bulb refills it from the ambient air. The buyer operates both pumps with the same hand, and there is no separate hand pump to keep track of. This is the central feature of the MSE05, and the difference versus the MSE04.
Automatic air pockets on both sides. The air pockets sit inside the liner rather than inside a bladder tube. Inflation is per side, not per zone, which means the patient gets a symmetric compression when both bulbs are pumped the same number of times. The pockets deflate passively through the valve when the patient releases the strap.
Three-strap hook-and-loop closure. The boot closes with three hook-and-loop straps across the front, tightened toe-to-knee. The straps are wide enough that they do not dig into the dorsal foot when the boot is fully inflated.
Breathable fitted contoured liner. The inner liner is cut and sewn to match the shell, with breathable fabric panels along the front of the tibia and the dorsal foot, and a velvet-feel panel at the calf and ankle. The liner is removable for washing.
Ventilated panels and soft lining fabric. Cut-outs in the shell pair with breathable fabric panels in the liner, so the boot stays usable in warm clinical settings and in summer retail programmes.
Low-profile, hard-wearing rocker sole. The outsole has a curved rocker geometry that promotes a natural heel-to-toe gait and is dense enough to take the punishment of a rental fleet. The low profile reduces the leg-length discrepancy that taller walker soles create.
No separate hand pump. The buyer does not need to sterilise, store or issue a hand pump. This is a real workflow saving for a hospital programme and a real merchandising saving for a retail SKU — one less loose part in the carton.
Quick and easy to fit. Two minutes is enough for a trained nurse or a first-time patient to fit the boot over a stockinette, inflate both sides, and walk. Specify it when the prescription allows it.
Material composition for this SKU is listed in our product data as Plastic, Foam, Velvet. Velvet here is the calf-and-ankle inner panel; foam is the insole and any liner padding; plastic is the shell. The exact fibre breakdown of the velvet panel and any latex content of the air-pocket film are not published on the current page and need to be confirmed against the factory specification before you print a fibre label, a customs description or an EU market-compliance view. 【 the specification block lists three materials but does not state which layer each one refers to; this feeds a fibre label, a customs declaration and a latex-allergy assessment under EU MDR. Do not print a composition until the factory confirms each layer.】
The MSE05 inflatable walker boot is specified for stable foot and ankle injuries where the goal is immobilisation with simple symmetric compression and where a one-piece inflation mechanism is preferred.
One point has to be stated plainly. The MSE05 is a support device, not a medical device and not a treatment. It immobilises and compresses; it does not diagnose, treat or prevent any condition. Any claim of that kind needs clinical evidence and a different regulatory route. If your market requires a medical device classification for the product you intend to sell, tell us before development starts.
Three sizes are offered: S, M and L. Custom sizing outside this range is available on request. The leg and foot measurements for each size are not published on the current product data and we are not going to invent them — ask for the size chart before you commit a range to a retailer, because a wrong size chart is the most common reason an inflatable walker programme gets returned.
The MSE05 suits three buying programmes, and we will say plainly where it does not fit.
It suits hospital and orthopaedic clinic procurement where the prescription is stable fracture or post-operative immobilisation but the patient — or the nurse fitting the boot — does not want a separate hand pump. It suits retail pharmacy programmes where the buyer wants a single inflatable walker boot SKU to cover most ankle sprains and stable fractures. And it suits occupational health and sports medicine programmes where the workflow requires a one-piece, fast-to-fit boot.
It does not fit a buyer who needs ROM adjustment inside the boot during recovery — that is what MSE06 and MSE08 are for. And it does not fit a buyer who wants the patient to inflate the boot through a mouthpiece rather than a built-in pump — that is the orthopedic CAM air walker MSE04.
The boot is worn over a sock or a light stockinette, not directly against the skin. Sit the patient on a chair with the knee at right angles. Slide the foot into the boot, seat the heel against the back of the shell, and fasten the straps toe-to-knee — snug, not tight. Squeeze each integrated pump until the compression feels even on both sides. The patient stands and walks with the rocker sole engaging at the heel.
Remove the liner daily for airing. Hand-wash the liner in mild soap, rinse, and line dry away from direct heat. Do not machine wash the shell — wipe it down with a damp cloth and a mild disinfectant. Do not tumble dry the liner, since heat damages the velvet panel and the air-pocket film. Replace the pump bulb if it loses elasticity, because a soft bulb is the most common cause of the boot feeling loose after a week of wear.
Medisolemates has manufactured orthopaedic and medical support products in Shenzhen since 2010. The factory, the cutting room and the packaging line are on one site, which is what makes a low-MOQ colour run and a quick sample turnaround realistic for an inflatable walker like this.
Customization available on this model 【the following list reflects standard requests we handle; confirm each against the current quotation for this SKU before offering it to a customer】:
MOQ, lead time and price depend on the size run, colour count and packaging, and are quoted per programme. Send us the specification you need and we will come back with a quotation. Enquiries submitted through this page are answered within 12 hours.
Medisolemates holds ISO 13485 certification for its quality management system, and holds CE conformity and FDA registration references covering the product range. The full certificate set, material test reports and carton marking templates are supplied with the quotation rather than published on this page, because certificate scope has to match the specific model and the specific market.
【 the wording of the certificates block on this product page lists FDA, CE, ISO13485 as “Certificates”. ISO 13485 is a quality-system certification held by the legal entity; CE is a conformity marking and FDA is normally a registration or listing rather than a certificate. Confirm the exact wording you want to use per market before publishing it.】
The MSE05 has two hand pumps built into the shell — one on the medial side and one on the lateral side. Squeezing a pump bulb inflates the air pocket on that side, which adds compression around the ankle and the lower leg. There is no separate hand pump and no mouthpiece to operate; the patient inflates the boot by hand and deflates it by opening the small valve on each pocket.
The MSE04 is a CAM air walker with medial and lateral air bladders inflated by mouth through a valve — finer control over pressure, but the patient needs a mouthpiece and a working lung. The MSE05 is an inflatable walker boot with two hand pumps built into the shell — coarser control, but the patient can inflate it without using their mouth, and there is no separate hand pump to keep track of. Specify MSE05 when single-operator hand inflation and a low workflow footprint matter. Specify MSE04 when finer per-side pressure adjustment matters.
The MSE03 is a short or high air walker boot — same family, but offered in two height configurations for buyers who need a taller boot for tibial indications. The MSE05 is the standard height, with two integrated pumps. Specify MSE03 when the prescription calls for a high-boot version. Specify MSE05 when standard height with built-in pumps is enough.
The MSE08 is an air ROM walker with a dial-stepped ROM hinge (7.5° increments). The MSE05 is a static inflatable walker with no ROM hinge. Specify MSE08 when the prescription includes progressive range-of-motion exercise. Specify MSE05 when immobilisation at a fixed angle is the goal and built-in hand pumps are preferred over a mouthpiece.
It depends on the market and on how the product is presented. In the EU, an inflatable walker marketed as a support for stable fractures and post-operative rehabilitation can be classified as a medical device under MDR 2017/745; the same product marketed as a sports accessory is not. The classification drives conformity assessment, technical documentation and labelling. If your market requires a medical device route for the product you intend to sell, tell us before development starts.
Yes. The inner liner is removable for hand-washing in mild soap. Line dry away from direct heat. Do not tumble dry, since heat damages the velvet panel and the air-pocket film.
Yes. Custom colour, branded hang tags and backing cards, private-label sewing labels, custom retail packaging and carton marking are all available. MOQ depends on the size run and colour count and is quoted per programme.
Tell us the size run, colour, packaging and destination market you are working with, and we will come back with pricing, MOQ and lead time. Quotations are prepared by a person, and every enquiry submitted here is answered within 12 hours.
Contact: +86 199 2645 9283 · sale@medisolemates.com
Submit Your Inquiry to Medisolemates,
All the Inquiries Will Be Replied Within 12 Hours.
We will contact you within three hours, please pay attention to the email with the suffix “@medisolemates.com” or “@knoltechs.com”
