Protects the lower leg, foot, and ankle. Moulded plastic struts provide support and are contoured to comfortably fit the shape of the leg. Perfect for individuals recovering from lower leg or foot injuries or surgeries.
Item No: MSE01
Material: Plastic, Foam, Velvet, EVA
Color: Black
Product Size: XS, S, M, L, XL – High/Short
Certificates: FDA, CE , ISO13485
The MSE01 orthopaedic fixed walker is the entry-level rigid-shell walker in the Medisolemates line. The shell is a pair of moulded plastic struts — contoured to fit the shape of the lower leg and the foot — that hold the ankle at a fixed angle once the closure is done up. There is no air bladder, no inflatable bag, no ROM hinge and no hand pump. The patient gets rigid support and nothing else. It is the model to specify when the prescription is deep, padded, rigid immobilisation for a long rental fleet rather than lightweight daily use or adjustable compression.
For a buyer sourcing from a Chinese orthopaedic manufacturer, the practical way to describe this SKU is: an orthopaedic fixed walker with moulded plastic struts, available in short (ankle-height) and high (calf-height) configurations, in a five-size run from XS through XL. The product photo set shows a high-height shell worn over jeans — that is the SKU: deeper and more padded than the MSE02, the slim aluminium open-toe alternative. If your buyer needs a slim, low-profile walker for a wider forefoot, that is a different SKU — see the non-air walker boot MSE02. If your buyer needs pneumatic compression, that is the air walker boot MSE03, the CAM air walker MSE04 or the inflatable walker boot MSE05. If your buyer needs ROM adjustability, that is the non-air ROM walker MSE07 or the air ROM walker boot MSE08.
Five construction details matter when you specify this for a retail or hospital programme.
Moulded plastic struts. Two moulded plastic struts run vertically along the medial and lateral sides of the lower leg. The struts are the structural backbone of the boot — they hold the ankle at a fixed angle once the closure is done up, and they are contoured to match the shape of the leg rather than to a generic straight column. Plastic is heavier than aluminum but tougher against repeated rental-cycle impacts, which is why the MSE01 reads as a deep, durable walker rather than a slim, lightweight one.
Two height configurations. The MSE01 ships in either a short version (ankle-height, covers the malleoli and the lower tibia) or a high version (calf-height, extends up the tibia to just below the knee). A buyer can stock both heights under one part number, and the only difference between them is the height of the rigid struts — the closure, the padding and the rocker sole are identical between the two. Specify short for metatarsal and forefoot indications; specify high for tibial and Achilles tendon indications.
Foam and velvet inner lining. The inner liner uses a thick foam pad at the ankle and a velvet-feel panel at the calf and dorsal foot. The combination is the standard comfort treatment for this category, and it is what makes the MSE01 read as a deeper-padded rental-friendly walker versus the slimmer MSE02. The padding is also what determines how the boot feels during a long day of wear.
Rocker sole. The outsole has a curved rocker geometry that promotes a natural heel-to-toe gait and shortens the relearning period when the patient transitions back to ordinary footwear.
Hook-and-loop strap closure. Multiple hook-and-loop straps close the boot across the front, tightened toe-to-knee. The straps are wide enough that they do not dig into the dorsal foot.
Material composition for this SKU is listed in our product data as Plastic, Foam, Velvet, EVA. Plastic here is the moulded struts; velvet is the calf and dorsal-foot inner panel; foam is the ankle padding; EVA is the insole layer. The exact fibre breakdown of the velvet panel and the per-layer thickness are not published on the current page and need to be confirmed against the factory specification before you print a fibre label, a customs description or an EU market-compliance view. the specification block lists four materials and the four-layer mapping is reasonable, but the per-layer thickness and any latex content are not stated. Do not print a composition until the factory confirms each layer.
The MSE01 orthopaedic fixed walker is specified for stable foot, ankle and lower-leg injuries where the goal is rigid immobilisation without pneumatic compression.
One point has to be stated plainly. The MSE01 is a support device, not a medical device and not a treatment. It immobilises and supports; it does not diagnose, treat or prevent any condition. Any claim of that kind needs clinical evidence and a different regulatory route. If your market requires a medical device classification for the product you intend to sell, tell us before development starts.
Five sizes are offered in each height configuration: XS, S, M, L and XL. The leg and foot measurements for each size are not published on the current product data and we are not going to invent them — ask for the size chart before you commit a range to a retailer, because a wrong size chart is the most common reason an orthopaedic walker programme gets returned.
The MSE01 suits three buying programmes, and we will say plainly where it does not fit.
It suits hospital and orthopaedic clinic procurement where the prescription is stable fracture or post-operative immobilisation and the buyer wants the deepest, most padded walker in the line. It suits rental fleet programmes where the boot needs to survive repeated issue-and-return cycles. And it suits retail pharmacy programmes where the buyer wants an entry-level orthopaedic fixed walker SKU to cover ankle sprains and stable fractures at a lower price point than the air walker line.
It does not fit a buyer who needs a slim, low-profile walker with an open toe for a wider forefoot — that is the non-air walker boot MSE02. It does not fit a buyer who needs pneumatic compression — that is MSE03, MSE04 and MSE05. It does not fit a buyer who needs ROM adjustment inside the boot during recovery — that is what MSE07 and MSE08 are for. And it does not fit a buyer who needs a soft, low-bulk sleeve rather than a rigid shell — that is the ankle brace category, not the CAM walker category.
The boot is worn over a sock or a light stockinette, not directly against the skin. Sit the patient on a chair with the knee at right angles. Slide the foot into the boot, seat the heel against the back of the shell, and fasten the straps toe-to-knee — snug, not tight. The patient stands and walks with the rocker sole engaging at the heel.
Remove the liner daily for airing. Hand-wash the liner in mild soap, rinse, and line dry away from direct heat. Do not machine wash the shell — wipe it down with a damp cloth and a mild disinfectant. Do not tumble dry the liner, since heat damages the foam padding and the EVA insole. Inspect the moulded struts after any significant impact; a cracked or bent strut is the most common cause of the boot failing to immobilise the joint after a fall.
Medisolemates has manufactured orthopaedic and medical support products in Shenzhen since 2010. The factory, the cutting room and the packaging line are on one site, which is what makes a low-MOQ colour run and a quick sample turnaround realistic for an orthopaedic fixed walker like this.
Customization available on this model the following list reflects standard requests we handle; confirm each against the current quotation for this SKU before offering it to a customer
MOQ, lead time and price depend on the height configuration, size run, colour count and packaging, and are quoted per programme. Send us the specification you need and we will come back with a quotation. Enquiries submitted through this page are answered within 12 hours.
Medisolemates holds ISO 13485 certification for its quality management system, and holds CE conformity and FDA registration references covering the product range. The full certificate set, material test reports and carton marking templates are supplied with the quotation rather than published on this page, because certificate scope has to match the specific model and the specific market.
the wording of the certificates block on this product page lists FDA, CE, ISO13485 as “Certificates”. ISO 13485 is a quality-system certification held by the legal entity; CE is a conformity marking and FDA is normally a registration or listing rather than a certificate. Confirm the exact wording you want to use per market before publishing it.
An orthopaedic fixed walker is a rigid-shell medical-style walker with moulded plastic struts that hold the ankle at a fixed angle. There is no ROM hinge and no air bladder — the patient gets rigid support and nothing else. The MSE01 is the entry-level orthopaedic fixed walker in this catalogue. It is deeper and more padded than the slim MSE02, which makes it the standard prescription for hospital rental fleets and post-operative immobilisation where the boot needs to survive repeated issue-and-return cycles.
Both are fixed walkers with no air and no ROM. The MSE01 is the orthopaedic fixed walker — a deeper, more padded boot built for buyers who need a high-volume rental fleet or a heavier prescription. The MSE02 is the non-air fixed ankle walker — a slim, lightweight boot with an aluminum + PP shell and an open-toe design. Specify MSE01 when the buyer wants a heavier-duty, deeper-padded boot. Specify MSE02 when the buyer wants a slim, low-profile walker that fits a wider forefoot.
The MSE03 is an air walker boot with a built-in inflatable bag inside the liner, inflated by mouth through a valve. The MSE01 is an orthopaedic fixed walker with no air and no compression. The MSE01 also uses moulded plastic struts (deeper, more padded); the MSE03 uses a standard plastic shell with an inflatable bag. Specify MSE03 when the patient needs general compression to manage swelling. Specify MSE01 when rigid immobilisation without compression is the goal.
The MSE07 is a non-air ROM walker — it also has no air, but it adds a ROM hinge with 10° increments between 45° plantarflexion and 30° dorsiflexion. The MSE01 is an orthopaedic fixed walker without a ROM hinge. Specify MSE07 when the prescription includes controlled range-of-motion exercise. Specify MSE01 when immobilisation at a single angle is the goal.
It depends on the market and on how the product is presented. In the EU, an orthopaedic fixed walker marketed as a support for stable fractures and post-operative rehabilitation can be classified as a medical device under MDR 2017/745; the same product marketed as a sports accessory is not. The classification drives conformity assessment, technical documentation and labelling. If your market requires a medical device route for the product you intend to sell, tell us before development starts.
Yes. The MSE01 is commonly specified for post-operative immobilisation of the lower leg, foot and ankle. The deeper padding and the moulded plastic struts are designed to be worn for several weeks during recovery, with the patient mobilising in the boot rather than in a cast.
Yes. Custom colour, branded hang tags and backing cards, private-label sewing labels, custom retail packaging and carton marking are all available. MOQ depends on the size run and colour count and is quoted per programme.
Three reasons, stated plainly.
The catalogue covers the whole decision tree. The MSE01 is the orthopaedic fixed walker for the entry-level prescription. The MSE02 is the non-air fixed ankle walker for the slim, low-cost alternative. The MSE03 is the air walker boot in two heights. The MSE08 is the air ROM walker with dial-stepped ROM. A distributor can carry the full post-operative ankle walker range from one supplier, on one certificate set, one slider tool and one packaging language.
The supply chain is short. Cutting, assembly and packing are on one site in Shenzhen, which is what makes small colour runs and sample-led development practical.
The documentation sits on the buyer’s side of the table. Material test reports, the certificate set, the size chart and the carton marking template all travel with the order.
Tell us the height configuration, size run, colour, packaging and destination market you are working with, and we will come back with pricing, MOQ and lead time. Quotations are prepared by a person, and every enquiry submitted here is answered within 12 hours.
Contact: +86 199 2645 9283 · sale@medisolemates.com
Submit Your Inquiry to Medisolemates,
All the Inquiries Will Be Replied Within 12 Hours.
We will contact you within three hours, please pay attention to the email with the suffix “@medisolemates.com” or “@knoltechs.com”
